Galena is kind of important lead mineral and gravity separation is usually involved to get galena concentrate when floatation separation is used in some places. More and more galena lead beneficiation factories use gravity separation instead of floatation separation. Why is gravity separation adopted for galena enrichment? And what advantages does gravity separation take over floatation separation, please?

The composition of galena is PbS with its good floatability and specific gravity of 7.4-7.6. So the beneficiation of galena lead ore is floatation separation and gravity separation. Floatation separation makes use of its floatability to get high grade galena concentrate. Floatation beneficiation processing can help to get high enrichment efficiency, but it requires much about the operator with its high plant investment and high operation cost. However, floatation separation can be unfriendly to environment and it has been limited by government, and it will be taken place by gravity separation. Gravity separation has a low requirement about the operator with its small plant investment, and low operation cost. With reasonable plant allocation, the beneficiation efficiency of gravity separation is even better than floatation separation. So galena lead ore gravity upgrading will be the leading beneficiation method instead of floatation separation.

Galena gravity upgrading works greatly to gain high grade galena lead concentrate on basis of big specific gravity difference between galena and its gangue. The crude galena is crushed and screened to make the galena granules liberated from its gangue. Kind of gravity separators like jigging machine can be used to purify the galena to get galena concentrate and tailings. Machines like crushers, rod mills, jig separators, shaking tables can be involved in galena gravity processing flow sheet. The simple crushing breaks the big blocks into small ones while rod mill, as kind of milling equipment, is used to mill the crushed output to be fine of -5mm without any extensive-milling. Galena lead jig machine can be involved to enrich the milled galena to get the final concentrate and tailings. There shall be some fine granules in the tailings from jigger, so a shaking table can be used to recover the galena in the tailings to improve the recovery.

Jigging Machine of 2LTC6109/8T 

Introduction:

Jigging machine of 2LTC-6109/8T is widely used in mineral dressing or beneficiation system for kinds of ores like  hematite, limonite, sand gold ore, manganese ore, tungsten ore, tin ore, Ta-Nb mineral, mercury ore, fluorite ore, barite ore, the azure quarries and so on. It can be also used to recovery metals or alloy particles from kinds of smelting slag like silica-manganese slag, ferro-manganese slag, nickel slag, steel iron slag, sulfate slag.

Working principle:

2LTC-6109/8T jigger is kind of side-moving rectangle jigger with two rows and four chambers. Motor drives reduction gears moving by the transmission. There are eccentric adjusting devices at both output ends of the reduction gears. The eccentric adjusting device drive the connecting rod after adjusting to drive the driving pan to do the alternation motion extruding the liquid in the cell body and promoting waves. The waving water moves through the screen to impact the ore on the screen making the ore in the state of free-failing body in the liquid. The ore grains own different dropping speed in the liquid because of the different density, so the ore will separate naturally. Finally, the heavier ore will be discharged out of the cell body after the adjustment and the lighter ore floats the waste-discharging mouth to be discharged and the whole ore beneficiation process is finished.

Advantages:

1. Energy-saving, high enrichment efficiency and environmental-friendly.
2. Trapezoid Working area, high recovery rate, and large handling capacity.
3. Eight jig dressing chambers, adjustable stroke and stroke frequency for each slot, wide range of selected particle size.
4. High stability, simple operation, convenient maintenance
 

Technical Parameter: