side-moving trapezoidal washbox/jig   side-moving diaphragm washbox/jigger

2LTC6109/8T  trapezoidal wash box/jig is also called side-moving jigger or side-moving diaphragm ore-washing machine. This machine belongs to side-moving pattern judging from its transmission part. It is a new-type diaphragm washbox/jigger.

2LTC6109/8T jigger is kind of a large-scale diaphragm jigger designed by Gongyi Forui Machinery Factory. This jigger can deal with ore below 8mm with its treatment capacity up to 40t/h. It is widely used in the beneficiation of kinds of ores like hematite, limonite, specularite, manganese, antimony, mercury, placer gold, sand tin, tungsten-tin, fluorite, barite, celestite. And it is also used in the beneficiation of metals from kinds of melting slag.

Comparing with other washbox/jigger, this 2LTC6109/8T sade-moving trapeziodal jigger takes the following characteristics:

1) large working area, and large treatment capacity

2) trapeziodal working area, large jigging way, anf high recovery

3) detachable, easy to transport and install, strong adapable

4) for independent jigging slots with each slot 2 chambers, 8 chambers in sum, easy to beneficiate the ore below 10mm withour classifying.

This side-moving diaphragm jigger is widely used  in the ore beneficiation fielf for its high beneficiation efficiency, high recovery and large treatment capacity. This jigger from Gongyi Forui Machinery Factory is guaranteed about the specification of  national standard & the quality. 

Gongyi Forui Machinery Factory, a professional manufacturer of kinds of mining beneficiation equipments, has the impeccable trial platform which can do free machine test. And we can design the flow sheet for your ore beneficiation. 

Introduction:

Jigging machine of 2LTC-6109/8T is widely used in mineral dressing or beneficiation system for kinds of ores like hematite, limonite, sand gold ore, manganese ore, tungsten ore, tin ore, Ta-Nb mineral, mercury ore, fluorite ore, barite ore, the azure quarries and so on. It can be also used to recovery metals or alloy particles from kinds of smelting slag like silica-manganese slag, ferro-manganese slag, nickel slag, steel iron slag, sulfate slag.

Working principle:

2LTC-6109/8T jigger is kind of side-moving rectangle jigger with two rows and four chambers. Motor drives reduction gears moving by the transmission. There are eccentric adjusting devices at both output ends of the reduction gears.The eccentric adjusting device drive the connecting rod after adjusting to drive the driving pan to do the alternation motion extruding the liquid in the cell body and promoting waves. The waving water moves through the screen to impact the ore on the screen making the ore in the state of free-failing body in the liquid. The ore grains own different dropping speed in the liquid because of the different density, so the ore will separate naturally. Finally, the heavier ore will be discharged out of the cell body after the adjustment and the lighter ore floats the waste-discharging mouth to be discharged and the whole ore beneficiation process is finished.

Advantages:

1. Energy-saving, high enrichment efficiency and environmental-friendly.
2. Trapezoid Working area, high recovery rate, and large handling capacity.
3. Eight jig dressing chambers, adjustable stroke and stroke frequency for each slot, wide range of selected particle size.
4. High stability, simple operation, convenient maintenance
 

Technical Parameter: